SANlight EVO 3-100 Set 400W Full Spectrum LED Grow Light System Australia

Dual-Fixture LED Grow Light System for 100x100 cm Hydroponic Cultivation

The SANlight EVO 3-100 Set 400W combines two SANlight EVO 3-100 fixtures into a complete lighting system for 100x100 cm indoor grow spaces. Manufactured in Austria, the set delivers 1090 µmol/s combined PPF at above 3 µmol/J system efficiency, with a dual-point light distribution pattern that produces more uniform canopy PPFD than a single high-output fixture at this footprint size.

The dual layout distributes photon output from two positions across the canopy, reducing the central intensity peak and improving PAR coverage toward the canopy edges and lower bud zones. The practical outcome is more consistent plant development, better lower canopy productivity, and more uniform harvest quality across the full 100x100 cm area.

Optimised for 100x100 Hydroponic Grow Tents

The EVO 3-100 Set is the recommended dual-fixture configuration for 100x100 cm grow tents where canopy uniformity is the priority. For growers who have reached the limits of single-fixture performance at this footprint and want measurably better edge coverage and lower bud development, the Set configuration is the next step. Compare all EVO configurations on the SANlight EVO Series overview page.

Key Benefits

• Dual-Point Distribution. Two fixtures eliminate the central hotspot produced by single-light systems at 100x100 cm, delivering a flatter PPFD map and more consistent development across the full canopy.
• 1090 µmol/s Combined PPF. Highest combined photon output in the EVO range for a 100x100 cm footprint, at above 3 µmol/J efficiency.
• Austrian Manufactured. Both fixtures built in Austria with premium Osram and Seoul Semiconductor diodes. Independently tested using laboratory photometric analysis.
• Improved Lower Canopy Penetration. Multi-point distribution increases usable light in the lower flowering zones, supporting denser bud development below the primary canopy layer.
• Silent Passive Cooling. Fanless aluminium heat sink on each fixture. Zero noise, zero maintenance, lower failure rates than fan-cooled alternatives.
• IP65 Rated. Both fixtures rated IP65 for water spray, humidity, and dust resistance. Suitable for sealed hydroponic grow rooms and commercial cultivation environments.
• 3-Year Manufacturer Warranty. Full commercial warranty across both fixtures. Lifespan exceeding 90,000 hours at approximately 90% output retention.

How It Works

Each EVO 3-100 fixture draws 200W and runs SANlight's asymmetric secondary optics at 90–112° beam angles. Positioned across the 100x100 cm canopy, the two overlapping photon fields produce a more homogeneous PAR map than a single central source. Combined system draw is 400W. Combined PPF output is 1090 µmol/s. Dimming is compatible with SANlight Bluetooth and magnetic dimmer accessories for intensity control across propagation, vegetative, and flowering stages.

Full Spectrum for Complete Growth Cycles

Both fixtures run a full 400–780 nm horticultural spectrum including optimised Far-Red wavelengths. Far-Red ratios are tuned to drive flower initiation, improve biomass accumulation, and support resin development during the flowering phase. The spectrum covers complete growth cycles from seedling through to late flower without fixture changes.

System Features

• Total Power. 400W (2 x 200W).
• Combined PPF. 1090 µmol/s.
• Efficiency. >3 µmol/J.
• Spectrum. Full Spectrum 400–780 nm + Far-Red.
• Coverage. 100x100 cm.
• Beam Angle. Asymmetric 90–112° per fixture.
• Fixtures. 2 x SANlight EVO 3-100.
• IP Rating. IP65.
• Cooling. Passive fanless per fixture.
• Lifespan. >90,000 hours.
• Dimming. SANlight Bluetooth and magnetic dimmer compatible.
• Daisy-Chain. Supported.

Applications

• 100x100 cm hydroponic grow tents
• Commercial hydroponic flowering rooms
• Professional indoor cannabis cultivation
• Controlled environment agriculture (CEA)
• High-yield indoor farming systems
• Sealed grow environments requiring passive cooling
• Growers upgrading from single-fixture setups

What Sets It Apart

The EVO 3-100 Set targets a specific performance gap: the 100x100 cm footprint where single-fixture systems produce uneven PPFD distribution and the EVO 4-120 single is oversized. Two Austrian-engineered EVO 3-100 fixtures at 400W combined deliver 1090 µmol/s with a dual-point distribution pattern that produces measurably better canopy uniformity than any single-fixture alternative at this coverage area.

Technical Specifications

• Brand. SANlight (Austria)
• Model. EVO 3-100 Set
• Total Power. 400W (2 x 200W)
• Combined PPF. 1090 µmol/s
• Efficiency. >3 µmol/J
• Spectrum. 400–780 nm Full Spectrum + Far-Red
• Coverage. 100x100 cm
• Beam Angle. 90–112° Asymmetric per fixture
• Fixtures Included. 2 x EVO 3-100
• IP Rating. IP65
• Cooling. Passive fanless
• Lifespan. >90,000 hours
• Warranty. 3 years manufacturer warranty
• Country of Manufacture. Austria

Frequently Bought Together

• Bluelab Guardian Monitor WiFi — real-time pH, EC, and temperature monitoring for dual-fixture grow environments
• SANlight EVO Series — compare all EVO configurations from 200W single fixtures to 680W dual-fixture sets
• SANlight EVO 4-120 — single-fixture 265W option for 120x120 cm spaces

Frequently Asked Questions

What growing area does SANlight EVO 3-100 Set 400W Full Spectrum LED Grow Light System Australia cover?

SANlight EVO 3-100 Set 400W Full Spectrum LED Grow Light System Australia is engineered for professional indoor cultivation. Coverage area depends on whether you are in the vegetative or flowering stage — LED lights typically cover a slightly smaller footprint at full flowering intensity than during veg. Refer to the coverage chart included with the light or in the product specifications for precise PPFD maps at your target hanging height.

How far should I hang SANlight EVO 3-100 Set 400W Full Spectrum LED Grow Light System Australia from my canopy?

Recommended hanging height varies by growth stage. During propagation and early vegetative growth, hang higher to reduce intensity. Move the light progressively closer as plants develop. Most growers target 40–60cm above canopy during flowering. Always use a PAR meter or manufacturer's PPFD chart to dial in the exact distance for your setup.

Does SANlight EVO 3-100 Set 400W Full Spectrum LED Grow Light System Australia run hot? Do I need extra cooling?

SANlight EVO 3-100 Set 400W Full Spectrum LED Grow Light System Australia is a full-spectrum LED designed for high efficiency with minimal heat output compared to equivalent HPS fixtures. Passive or active thermal management is built into the unit. You will still need adequate tent ventilation for temperature and humidity control, but SANlight EVO 3-100 Set 400W Full Spectrum LED Grow Light System Australia does not require water cooling or additional heat management beyond standard grow room airflow.

What is the warranty on SANlight EVO 3-100 Set 400W Full Spectrum LED Grow Light System Australia in Australia?

SANlight EVO 3-100 Set 400W Full Spectrum LED Grow Light System Australia comes with a manufacturer warranty covering defects in materials and workmanship. Warranty claims are handled through Apex Grow. Contact us at hello@apexgrow.com.au with your order number and a description of the issue and we will arrange a replacement or repair.

Can I dim SANlight EVO 3-100 Set 400W Full Spectrum LED Grow Light System Australia for seedlings and clones?

Yes — SANlight EVO 3-100 Set 400W Full Spectrum LED Grow Light System Australia includes a dimming function allowing you to reduce output for young plants, seedlings, and clones that cannot handle full intensity. Start at 20–30% output and increase progressively as plants mature and can tolerate higher light levels.