SANlight EVO 3-80 1.5 LED Grow Light | 200W Full Spectrum Hydroponic Grow Light Australia

SANlight EVO 3-80 LED Grow Light | 200W Full Spectrum for 80x80cm Tents Australia

The SANlight EVO 3-80 is an Austrian-engineered 200W full spectrum LED grow light purpose-built for 80x80cm indoor growing spaces. At above 3.0 µmol/J efficacy, it produces more usable light per watt than any equivalent HPS fixture, runs completely silent with passive cooling, and is backed by a 3-year manufacturer warranty with a rated lifespan exceeding 90,000 hours. For Australian growers running a quality 80x80cm tent, this is the light that matches the space correctly rather than being oversized or undersized for the footprint.

Why the EVO 3-80 Is Designed Specifically for 80x80cm

The 80x80cm footprint is where many LED grow lights underperform. Fixtures designed for 60x60cm are pushed beyond their optimal coverage area, producing intensity drop-off at the edges and uneven plant development. Fixtures designed for 120x120cm distribute their output too broadly across the smaller space, wasting photons and running higher wattage than the canopy requires.

The EVO 3-80 is built for 80x80cm specifically, with asymmetric secondary optics at 90 to 112 degrees that distribute 725 µmol/s PPF evenly across the full 0.64m2 canopy from centre to edge. The result is consistent plant development, reduced stretching at the canopy perimeter, and uniform flowering quality across every part of the growing area.

Performance Advantages for Australian Growers

The efficiency advantage of the EVO 3-80 over HPS is particularly relevant in Australia. At current electricity rates averaging 30 to 35 cents per kWh across Victoria, New South Wales, and Queensland, a 200W LED producing the same photon output as a 400W HPS saves approximately $10 to $12 per week in electricity on that light alone. Over a 10-week flowering cycle that is $100 to $120 per cycle per light, before factoring in the reduced cooling load from less radiant heat.

Australian summers present a specific challenge for LED growers. The EVO 3-80 produces minimal radiant heat compared to HPS, which reduces the heat management burden during heatwaves. The passive fanless aluminium heatsink has no moving parts to fail and generates no noise, which is relevant for growers running tents in shared living spaces.

What the EVO 3-80 Pairs With

The EVO 3-80 is matched precisely to the HOMEbox Ambient Q80+ with its PAR+ reflective lining, which redirects photons that would otherwise hit the tent walls back into the canopy. Running an EVO 3-80 in a Q80+ captures a measurably higher proportion of the fixture's output compared to standard mylar tents. For nutrient management, the Bluelab Combo Meter provides simultaneous pH, EC, and temperature readings for precise solution management.

Frequently Asked Questions

Is the SANlight EVO 3-80 enough for flowering in an 80x80cm tent? Yes. At 725 µmol/s PPF across an 80x80cm footprint, the EVO 3-80 delivers 600 to 700+ µmol/m2/s at canopy level, which is within the target range for most flowering crops at standard atmospheric CO2. For growers running CO2 supplementation above 1000 ppm, the EVO 5-120 provides additional intensity headroom.

How does the SANlight EVO 3-80 compare to HPS? A 200W EVO 3-80 produces equivalent or greater photon output to a 400W HPS while consuming half the electricity, generating significantly less radiant heat, and requiring no bulb replacements. The full spectrum including Far-Red also improves canopy penetration compared to the yellow-weighted output of HPS. See our full comparison guide: SANlight EVO and HPS compared for Australian growers.

Where is the SANlight EVO 3-80 made? Designed and manufactured in Vorarlberg, Austria. LED components are sourced from Osram (Germany) and Seoul Semiconductor (South Korea).

Does the EVO 3-80 need a separate driver or ballast? No. The driver is integrated into the fixture. Plug into a standard Australian 240V power point and hang at the recommended height above your canopy.

What hanging height should I use for the EVO 3-80? SANlight recommends 20 to 40cm above the canopy for most growing applications. Raise the fixture during early vegetative growth and lower it as the canopy develops. The passive fanless design means heat emission is minimal so closer hanging distances are safe.

Technical Specifications

• Brand: SANlight (Austria)
• Model: EVO 3-80 Series 1.5
• Power: 200W true draw
• PPF: 725 µmol/s
• Efficacy: Above 3.0 µmol/J
• Spectrum: Full spectrum 400 to 780nm including Far-Red
• Coverage: 80x80cm
• Beam angle: Asymmetric 90 to 112 degrees
• IP rating: IP65
• Cooling: Passive fanless aluminium heatsink
• Lifespan: Above 90,000 hours
• Warranty: 3 years manufacturer warranty
• Country of manufacture: Austria