Quick Answer

18W LED clone bar, 9000K colour temperature, 2 strips per pack.
Samsung diodes, direct T5 fluorescent replacement, 60% more efficient than a comparable T5 fixture.
Fully waterproof housing and connectors, rated for 54,000 hours of use.
Auto-sensing 100-277V input, 0.15 amps on 120V, 10ft 240V AU cord included.
Daisy chain up to 100 strips on a single 20amp circuit.
2-year warranty, tested in real nursery applications for over 2 years before release.

The Clone Bar is built specifically to replace ageing T5 fluorescent setups still common in propagation areas. At 9000K, it sits in the right colour temperature range for strong, compact clone and seedling growth, without the heat output or bulb-replacement hassle that comes with T5 tubes.

Why 9000K for Propagation

Clones and seedlings don't need the same spectrum as a flowering canopy. A cooler 9000K output keeps growth compact and sturdy rather than stretched, which matters more at this stage than raw intensity. Each strip runs Samsung diodes at a 120-degree beam angle, rated at 1.8 umol/j efficiency, giving even coverage across a standard propagation shelf without hot spots.

Built to Actually Replace T5, Not Just Compete With It

Running at 18W per strip, the Clone Bar uses roughly 60% less power than an equivalent T5 fixture for comparable output, which adds up quickly if you're running multiple shelves through a propagation area year-round. Input is auto-sensing across 100 to 277V, drawing 0.15 amps at 120V, so it runs cleanly regardless of your mains supply. It's also fully waterproof, housing and connectors included, which T5 tube setups generally aren't, making it a more practical fit for the humid conditions around a clone dome or misting setup.

Setup and Scaling

Each pack includes 2 strips, designed to run as a matched array per shelf. The 10ft 240V AU cord makes installation straightforward, and the strips daisy chain, up to 100 strips can run off a single 20amp circuit, which matters if you're scaling up a propagation area rather than running a single shelf. Hanging clips and a zip tie slot are built in for quick mounting.

Suitable For

Clone and seedling propagation shelves, mother plant maintenance under lower light, and any T5 replacement application where waterproofing and running cost matter.

Frequently Asked Questions

Can this replace my existing T5 fixture directly?

Yes, it's designed as a direct T5 replacement, running at roughly 60% less power for comparable propagation output, with the added benefit of being fully waterproof.

How many strips can I run off one circuit?

Up to 100 strips can be daisy chained on a single 20amp circuit, which covers most propagation area setups without needing multiple circuits.

Is 9000K too cool for clones?

No, a cooler colour temperature in this range is well suited to propagation specifically, keeping growth compact rather than stretched, which is exactly what you want at the clone and seedling stage.